Potrebujete več?
Količina | |
---|---|
1+ | € 1,520 |
50+ | € 1,150 |
100+ | € 1,110 |
250+ | € 1,070 |
500+ | € 1,030 |
1000+ | € 1,000 |
INFORMACIJE O IZDELKU
Pregled izdelka
The B57045K0473K000 is an NTC Thermistor with electrically isolated aluminium case, tinned copper leads and screw terminals. This B57045K series thermistor features good thermal coupling through screw-type case (thread M3). A lead (wire) may be bent at a minimum distance of twice the wire's diameter plus 4mm from the component head or housing. When bending ensure the wire is mechanically relieved at the component head or housing. Twisting (torsion) by 180° of a lead bent by 90° is permissible at 6mm from the bottom of the thermistor body. Soldering can use resin-type flux or non-activated flux. The soldering due to insufficient preheating may cause ceramic cracks. Suitable for temperature compensation, measurement and control (chassis mounting).
- Bending radius should be at least 0.75mm
- 450mW Maximum power
Področja uporabe
Test & Measurement
Opozorila
Do not store thermistors where they are exposed to heat or direct sunlight. Avoid contamination of thermistor surface during storage, handling and processing. Do not touch components with bare hands.
Opombe
Gloves are recommended.
Tehnični podatki
NTC
Through Hole
B57045K
4450K
± 3%
-
8mm
-
-
47kohm
± 10%
Chassis Mount
Screw
-
Aluminium
30mm
125°C
No SVHC (21-Jan-2025)
Tehnični dokumenti (2)
Zakonodaja in okoljevarstvo
Država, v kateri je bila izvršena zadnja pomembnejša dodelava.Drzava poreklaAustria
Država, v kateri je bila izvršena zadnja pomembnejša dodelava.
RoHS
RoHS
Potrdilo o skladnosti izdelka