ADN4622BCPZ-RL

ADN4622 is a quad-channel, signal-isolated, low-voltage differential signalling (LVDS) buffer that operate at up to 2.5Gbps with very low jitter. The device integrates Analog Devices, Inc., iCoupler® technology, enhanced for the high-speed operation to provide drop-in galvanic isolation of LVDS signal chains. AC coupling and/or level shifting to the LVDS receivers and from the LVDS drivers allows the isolation of other high-speed signals such as current-mode logic (CML). This include a refresh mechanism to monitor the input and output states and ensure they remain the same in the absence of data transitions. For lower power consumption and high-speed operation with low jitter, the LVDS and isolator circuits rely on 1.8V supplies. Application includes isolated video and imaging data, analogue front-end isolation, data plane isolation, isolated high speed clock and data links, multi-gigabit SERDES, and board-to-board optical replacement (for example, short reach fibre).

• Rated dielectric insulation voltage is 5.7KVrms (1 minute duration)
• Complies with TIA/EIA-644-A LVDS signal levels
• Quad-channel configuration (ADN4622: 2 + 2, ADN4624: 4 + 0)
• Any data rate up to 2.5Gbps switching with low jitter, 10Gbps total bandwidth across four channels
• Typical propagation is 2.15ns (DINx+ and DINx− to DOUTx+ and DOUTx−, TA=25°C)
• Typ common-mode transient immunity is 100KV/µs (common mode voltage=1000V, transient magnitude=800V)
• Minimum input high voltage is 0.65VDDx (TA= -40°C to +125°C)
• Typical offset voltage is 1.17V (VDD1=1.7V to 1.9V, TA=-40°C to +125°C)
• Temperature rating range from -45°C to +125°C
• 32-lead LFCSP-EP package

Opombe

ADI products are only authorized (and sold) for use by the customer and are not to be resold or otherwise passed on to any third party