
Potrebujete več?
Količina | |
---|---|
1+ | € 2,360 |
10+ | € 1,420 |
25+ | € 1,380 |
50+ | € 1,350 |
100+ | € 1,310 |
500+ | € 1,130 |
INFORMACIJE O IZDELKU
Pregled izdelka
The HCPL-4502-000E is a 1-channel 8-pin Diode-transistor Optocoupler uses an insulating layer between a LED and an integrated photodetector to provide electrical insulation between input and output. Separate connections for the photodiode bias and output-transistor collector increase the speed up to a hundred times that of a conventional phototransistor coupler by reducing the base-collector capacitance. It is designed for high speed TTL/TTL applications. A standard 16mA TTL sink current through the input LED will provide enough output current for 1 TTL load and a 5.6kΩ pull-up resistor. CTR for these devices is 19% minimum at IF=16mA. It is suitable for high voltage insulation, video signal isolation and line receivers.
- Open collector output
- 15kV/µs Minimum common mode transient immunity at VCM=1500V
- 630V Maximum working insulation voltage
- 0 to70°C Guaranteed performance from temperature range
- 1Mbps High speed
Področja uporabe
Motor Drive & Control, Signal Processing, Power Management
Opozorila
Market demand for this product has caused an extension in leadtimes. Delivery dates may fluctuate. Product exempt from discounts.
Tehnični podatki
1 Channel
8Pins
3.75kV
20V
No SVHC (23-Jan-2024)
DIP
25mA
19%
-
Tehnični dokumenti (1)
Alternative za HCPL-4502-000E
1 najden izdelek
Zakonodaja in okoljevarstvo
Država, v kateri je bila izvršena zadnja pomembnejša dodelava.Drzava poreklaSingapore
Država, v kateri je bila izvršena zadnja pomembnejša dodelava.
RoHS
RoHS
Potrdilo o skladnosti izdelka